FREQUENCY
- Laboratory Accurate—
±0.001% of setting (10 PPM).
- Six Real World
Ranges—
1 to 20000 Counts-Per-Hour (CPH), 0.1 to 2000.0
Counts-Per-Minute (CPM), 0.01 to 999.99 Hz, 0.001
to 99.999 kHz and 0.01 to 250.00 kHz.
- Calibrate Totalizers—
Output a selectable number of pulses over 1 to 99
minutes to verify totalizer readings. The calibrator
automatically stops outputting when the selected number
of pulses has been sent to the totalizer.
- Count Pulses—
Use as a timed totalizer to check flowmeter and integrator
outputs. Built-in totalizer to 99999 counts with optional
timed operation to 99 minutes up to maximum rate of
100 Hz.
- Save Time—
Calibrate flowmeters, frequency transmitters and integrators.
Use CPH and CPM ranges to directly display extremely
slow signals, eliminating waiting with stop watch
and calculator.
- Match Your Receiver's
Input—
Select from sine, zero crossing square or zero
based square wave output. Adjustable amplitude from
50 mV to 12 V p-p.
- Reads All Waveforms—
From 40 mV to 240 V peak. Instantly recall the
minimum and maximum frequency measured.
- Quik-Chek Switch—
Instantly recall 18 output frequencies (three for
each range). Fast, easy adjustment with a multi-speed
digital potentiometer.
- Built-In Leads—
Large alligator clips for easy connections. Optional
BNC connector available.
- Long Battery Life—
Six AA alkaline batteries last over 40 hours.
- Generate Square
Waves—
0.5 Hz to 60 kHz in 40 steps. Amplitude from mV
to 15 V p-p.
- Zero Based and
Zero Crossing Output—
Matches inputs of frequency input devices.
- Extremely Accurate—
±8 PPM (0.0008% of setting).
- Long Battery Life—
Two 9 V alkaline batt. last 200 hours!
- Frequencies—
5, 6, 10, 12, 15, 20, 30 & 60 times multiplier.
- Multiplier—
0.1, 1, 10, 100 & 1000 times frequency scale.
|
|
